9778威尼斯人
澳门威尼斯娱乐网址 9778威尼斯人
O型圈ORing
非标件Other parts
048.com 油启 Oil Seal
胶条&胶球 Cord&Ball
澳门威尼斯人4427com 光滑件lubrications
四氟密封PTFE Seal
组合垫圈Bonded Seal
其他密封材料Others
澳门威尼斯人6625
液压密封Hydraulic
气动密封Pneumatic
尺度密封standard

地点(ADD)上海市奉贤区奉城工业园

minchang road,fengxian,shanghai,china
邮编(Postal Code):201411
Tel:+86-21-37588159

Fax:+86-21-37588091
Website:www.runlion-china.com
E-mail:[email protected]

润狮产物

产品名称:GT齐氟密封圈-chemraz FFKM-ORing
产物 编号:RL20130201chemrezFFKM
产品规格:
产品类别:FFKM O-Ring
放大检察:
产物阐明:

 

 

Chemraz® 具有本钱效益,处理了很多正在工业界中, 特别是石化电力中, 最难题的密封题目.不论是正在泵浦罩框、反应器或是正在搅拌器、阀门里, Chemraz®, 皆能为您处理最难题的密封题目.

Chemraz504™

特性

化学相容性佳,普遍应用于严苛的操纵情况.

紧缩量低, 正在温度及压力极剧变化/轴心偏偏摆/O-Ring发生膨胀等的状况下, 仍具有优越的机能.

耐高温才能佳.

Chemraz® 504为强度较佳的齐氟化橡胶,具有优秀的化学組抗才能,适用于高压或高温的场所.
温度: -22 ~ 446°F ( -30 ~ 230°C )
运用:
机器密封, 搅拌机, 阀类,掌握仪表, , 喷雾器, 计量装备, 联轴器, 回响反映槽等.

Chemraz® 505™

Chemraz505齐氟化橡胶具有优秀化学阻抗才能,稀奇适用于华氏0度以下或混淆介质等造程. 
温度:-22°F to 446°F (-30°C to 230°C)

特性

化学相容性佳,普遍应用于严苛的操纵情况.

紧缩量低, 正在温度及压力极剧变化/轴心偏偏摆/O-Ring发生膨胀等的状况下, 仍具有优越的机能.

耐高温才能佳.
运用:
机器密封, 搅拌机, 阀类, 掌握仪表, , 雾化器, 计量装备, 联轴器, 回响反映槽, 压缩机等.

稀奇适用于华氏0度以下或混淆介质等造程

齐氟化橡胶

相符AS568S标准规范

温度::-22°F to 446°F (-30°C to 230°C)

特性

化学相容性佳, 普遍应用于严苛的操纵情况.

下硬度及高密度低落天生挤压裂缝的可能性.

耐高温才能佳

普遍, 最常运用正在高压操纵情况, 也能通用于多种介质, 如酸,苛性钠, 乙醛, 酯类, 芬芳类, 热水, 蒸气, 胺类, , , 酮等
温度::-22°F to 446°F (-30°C to 230°C)
运用:
机器密封, 搅拌机,泵阀类, 掌握仪表, , 雾器, 计量装备, 联轴器, 回响反映槽, 压缩机等 Chemraz® 510 运用非常普遍, 最常运用正在高压操纵情况, 也能通用于多种介质, 如酸, 苛性钠, 乙醛, 酯类, 芬芳类, 热水, 蒸气, 胺类, 甲醇, , 酮等.

齐氟化橡胶

相符AS568S标准规范

温度:-22ºF to 428ºF (-30ºC to 220ºC)

特性

无碳析出净化题目.

耐高温才能佳.

Chemraz® 514 是由红色化合物所组成的齐氟化橡胶,应用于防备碳析出净化的场所. 
温度:-22ºF to 428ºF (-30ºC to 220ºC)
运用:机器密封,搅拌机,阀类,,喷雾器,联轴器,回响反映槽等.

齐氟化橡胶

相符AS568S标准规范

温度:-22ºF to 428ºF (-30ºC to 220ºC)

特性

无碳析出净化题目.

耐高温才能佳.

Chemraz® 517是由红色化合物所组成的齐氟化橡胶,应用于防备碳析出净化的场所. 
温度:-22ºF to 428ºF (-30ºC to 220ºC)
运用:机器密封,,计量装备等 

齐氟化橡胶

相符AS568S标准规范

温度:-4ºF to 482ºF (-20ºC to 250ºC)

特性

具有卓着的ED抗性,能连结密封机能,并延伸装备使用寿命.

联合普遍的化学抗性及ED抗性,有用防备走漏及装备毛病.

低落保护本钱.

延伸装备的保护周期.(MTBF)

Chemraz® 526 齐氟化橡胶供应极佳的化学适应性,而且能抗缓慢性减压.对运用正在化学情况回响反映猛烈的装备而言,为最理想化合物产物.Chemraz 526® 具有大局限的化学抗性,适用于发酵造程-澳门威尼斯人4427com,,腐蚀性物资,热水及蒸气等场所. 
温度:-4ºF to 482ºF (-20ºC to 250ºC)
运用:,阀类,石化装备,压缩机. Chemraz 526® 具有大局限的化学抗性,适用于发酵造程,,腐蚀性物资,热水及蒸气等场所.

齐氟化橡胶

相符AS568S标准规范

温度:最高可达600ºF (316ºC)

特性

优胜的耐高温才能600ºF (316ºC),兼具普遍的化学抗性,Chemraz® 555运用正在多种介质皆有不错的显示.

除一样平常物理特性中,亦考量到强度设想,可做多种运用.

抗压缩才能佳,于温度/压力猛烈转变及震惊场所,仍具优越的密封才能.

运用局限普遍,能大幅低落库存的冗杂性,使产物规格化.

临时密封机能佳,低落装备保护本钱.

Chemraz® 555为具普遍化学抗性的齐氟化橡胶,应用于化学反应激烈性的流体. Chemraz® 555运用场所非常普遍,耐压性优于一样平常齐氟化橡胶,能运用的介质包罗酸硷类,腐蚀性物资,乙醛,酯类,乙醚,芬芳类,热水,蒸气,胺类,甲醇,酮类,混淆介质造程等.
温度:最高可达600ºF (316ºC)
运用:机器密封,搅拌机,阀类,掌握仪表,,喷雾器,计量装备,联轴器,回响反映槽等. Chemraz 555 能运用的介质包罗酸硷类,腐蚀性物资,乙醛,酯类,乙醚,芬芳类,热水,蒸气,胺类,甲醇,酮类,混淆介质造程等.

齐氟化橡胶

相符AS568S标准规范

Chemraz® 584米色齐氟化橡胶由特殊化学配方制成,应用于前提行课的化学制程具不错的耐久性. 
温度:-22ºF to 428ºF (-30ºC to 220ºC) 

特性

应于猛烈的氧化流体//臭氧/热水等场所,具有优秀的化学抗性.

无碳析出净化题目.
运用:应于猛烈的氧化流体//臭氧/热水等场所.

无碳析出净化题目.

齐氟化橡胶

相符AS568S标准规范

Chemraz® 585米色齐氟化橡胶由特殊化学配方制成,应用于前提严苛的化学制程具不错的耐久性. Chemraz® 585 具有优胜的化学抗性,适用于氧化回响反映猛烈及热水等场所. 
温度:-22°F to 428°F (-30°C to 220°C)

特性

應於劇烈的氧化流體//臭氧/熱火等場合,具備優良的化學抗性.

無碳析出净化問題.
运用:机器密封,搅拌机,阀类,,计量装备,掌握装备,回响反映槽,联轴器等.

齐氟化橡胶

相符AS568S标准规范

温度: -22 ~ 446°F ( -30 ~ 230°C )

特性

下质料密度,能适用于高压和严苛的事情情况.

宽大的化学兼容性.

优秀的高温特性.

运用

机器轴封,泵壳体,回响反映装配,混合器,压缩机,阀件

Chemraz® 600, a perfluoroelastomer, works well in both high and
low temperatures. Additionally, Chemraz® 600
provides unparalled performance in hot water and steam. Because
of its high durometer rating (Shore A 90), components made from
Chemraz® 600 offer greater resistance in high pressure and aggressive
Temperatures:-4°F to 500°F (-20°C to 260°C). 
Applications:
Mechanical seals,Pump housings,Reactors,Mixers,Compressors,Valves.

齐氟化橡胶

相符AS568S标准规范

温度: -4 ~ 500°F ( -20 ~ 260°C )

Chemraz® 605 exhibits unparalleled performance with hot amines, steam and water and functions well. A high-temperature compound with
superior compression set resistance, physical properties and excellent chemical resistance, it excels in demanding static and semi-dynamic
applications. 
Temperatures:-4ºF to 500ºF(-20°C to 260°C). 
Applications:
Mechanical,seals,Pump,housings,Reactors,Sampling/metering ,equipment,Mixers,
Compressors,Control instrumentation,Valves,Sprayers,dispensers,Diaphragms,Couplings

特性

优秀的高温耐受性

极佳的耐压变形特性

宽大的化学兼容性,适用于种种严苛序言

运用

机器密封,泵壳体, 搅拌机, 阀类, 掌握/仪表, , 喷雾器/分注器,联轴器,回响反映槽,取样/丈量装备,隔阂,混合器,压缩机.-048.com

相符AS568S标准规范

温度:-0°F ~615°F (-18°C ~324°C).

齐氟化橡胶

Greene, Tweed®’s Chemraz® 615 exhibits outstanding hightemperature properties, with a temperature range from 0°F to 615°F (-18°C to 324°C). Chemraz® 615’s chemical resistance and low compression set characteristics combine to out perform tin-cured perfluoroelastomers.
Temperatures:-0°F to 615°F (-18°C to 324°C). 
运用

Mechanical seals,process control instruments,Heat exchangers,Valves,Agitators & mixers,Pumps,Couplings.

Inorganic and organic chemicals, acids, reagents, heat transfer fluids and hydrocarbons.

相符AS568S标准规范

齐氟化橡胶

温度: -4 ~ 500°F ( -20 ~ 260°C )

Chemraz® SD625, a black-colored perfluoroelastomer, offers the broadest chemical resistance of any elastomer, combining the resilience and sealing force of an elastomer with chemical resistance and low extractables similar to PTFE. Not only is it FDA and USP Class VI compliant, but Chemraz® SD625 also passes USP Physicochemical Testing, USP, and has been tested to USP elastomeric closures, USP, making it the most comprehensively tested perfluoroelastomer on the market.Critical applications and difficult seal replacement locations where maximizing MTBR (mean time between replacement) is paramount will benefit greatly from Chemraz® SD625.
Temperature:-4°F to 500°F(-20°C to 260°C)
Applications

Mechanical seals,Valves,Pumps,Mixers,Fermenters,Biomedical equipment, Couplings

特性

Superior high temperature properties

Outstanding resistance in steam over 302°F (150°C) and in CIP/SIP processes

Outstanding hot water & steam resistance

3-A® and FDA compliance meeting the highest purity standards

运用

机器密封,阀类,,混合器,发酵槽,联轴器

相符AS568S标准规范

齐氟化橡胶

温度:550°F/288°C

Greene, Tweed®’s Enduro™ LF10 Coating is a thin conformal, PTFE
based coating that can be applied to a variety of components
within manufacturing equipment including elastomeric, thermoplastic
or metal components to enhance their performance.
Enduro LF10 improves the performance by reducing the sticking
force between component interfaces or wear caused by friction,
both of which will reduce particulate generation. The coating
exhibits excellent adhesion, high purity and excellent conformality
to thoroughly cover complex surface features. With deposition at
low temperatures, it can be applied to many types of surface
materials. For aqueous chemical environments, Enduro LF10
can also render surfaces from hydrophilic to hydrophobic. The
coatings work well for both static and dynamic applications.
Reduced coefficient of friction for static and dynamic
elastomeric seals
temperatures:up to 550°F/288°C
Applications

Reduced sticking force (separation force) for seals including vacuum seals,Reduced coefficient of friction for plastic and metal components, Conversion of surface property from hydrophilic to
hydrophobic

特性

Continuous use at high temperatures equal to PTFE (up to 550°F/288°C) meets the thermal needs of most processes

Excellent purity, adhesion and conformality allows the coating to provide process benefits thus enhancing yield

High conformality enables coating of complex surface features

Friction and sticking force reduction extends lifetime of components, especially in dynamic and semi-dynamic applications

Deposition occurs at low temperatures allowing coating of delicate structures and temperature sensitive materials

Low friction properties minimize particulate generation between moving components

Changeable surfaces from hydrophilic to hydrophobic enhance process equipment process efficiencies

运用

Reduced sticking force (separation force) for seals including vacuum seals

Reduced coefficient of friction for plastic and metal components

Conversion of surface property from hydrophilic to hydrophobic-9778威尼斯人

齐氟化橡胶

相符AS568S标准规

温度: -35 ~ 450°F ( -37 ~ 232°C )

RGD (rapid gas decompression) is a phenomenon that often occurs when high-pressure gas molecules migrate into an elastomer at a compressed state. When the pressure surrounding the elastomer is suddenly released, the compressed gas inside the elastomer tries to expand and exit the elastomer, thus causing RGD (also known as explosive decompression). Greene, Tweed’s FKM® 938 is a fl uorocarbon elastomer specifi cally designed to withstand RGD in compressor components, valves and pumps. Most elastomers experience severe blistering or cracking when the forces of these expanding gases overcome the strength of the surrounding
material, but FKM®
 938 provides superior RGD resistant properties enabling seal integrity. FKM® 938 also offers an improved lower
temperature operating window. Its compression set resistance provides superior sealing and leak prevention unmatched by the leading competitive material. In addition, FKM®
 938 offers much better resistance to methanol, sour gas, hot water, steam and corrosion inhibitors than conventional fl uorocarbon elastomers,
extending seal lifetime.
Temperature:-35ºF to 450ºF(-37°C to 232°C)
Applications

Compressor components,Valves,Pumps

Chemraz® MSE™ SEALS

齐氟化橡胶

相符AS568S标准规范

温度: -422~ 600°F ( -252~ 315°C )

Chemically inert for virtually unlimited chemical compatibility

Low friction for smooth and consistent breakout and running friction, low power absorption & torque requirements, and can run dry or lubricated

Wide temperature range for temperatures from -252°C to 315°C(-422°F to 600°F)

Wide pressure range for vacuum systems or pressurized systems up to 60,000 psi

CVD chambers,Etch chambers,Quartz windows,Gas inlets,Furnaces,Wafer elevators,Robotics,Valves,Cryogenic pumps

特性

Chemically inert for virtually unlimited chemical compatibility

Low friction for smooth and consistent breakout and running friction, low power absorption & torque requirements, and can run dry or lubricated

Wide temperature range for temperatures from -252°C to 315°C(-422°F to 600°F)

Wide pressure range for vacuum systems or pressurized systems up to 60,000 psi

运用

CVD chambers,Etch chambers,Quartz windows,Gas inlets,Furnaces,Wafer elevators,Robotics,Valves,Cryogenic pumps

Chemraz® Xyfluor 860™

相符AS568S标准规范

温度: -76 ~ 450°F ( -60~ 232°C )

齐氟化橡胶

Dependable balance of physical properties at temperatures as low as -76ºF (-60ºC) and as high as 450ºF (232ºC)

Minimal sealing force required for low-sealing pressure applications

Excellent chemical resistance

Resistance to hydrocarbon fuels and lubricants

Good resistance to steam and water

Less likely to be damaged during installation a compared to PTFE and graphite

Better conformance to rougher surface finishes as compared to PTFE

运用

Xyfluor® 860 works well in demanding applications such as mechanical seals, gaskets and other custom components in a variety of metering pumps, valves and other high-performance equipment.

 

版权所有:上海润狮实业有限公司 沪ICP备:05082771号

友情链接:百度